A Tire Autopsy "Root Cause" Part 2

Last time I outlined the difference between reporting a condition such as "The tire went flat" and the Root Cause or fundamental reason why a tire is in the condition it is in. This is a critical item if you want to try and prevent another tire failure. This time I will cover one of the more common conditions many call a "Blowout".

What we are looking at is the evidence and tell-tale signs that point to the fact that the "Blowout" was really a Flex Failure of the sidewall due to a tire running at highway speeds while seriously underinflated. This happens so frequently we have a special name for it "RLOF" short for Run LOw Flex.

Here are a number of examples. While many are passenger tires some are Light Truck.

 

In each case there was melted polyester body ply cord. Polyester melts and fuses just like the nylon rope you get at the hardware store and hold a lighter under the end to melt it to stop it from fraying. Body ply looses about half its strength near 300°F and melts at about 395°F.

  

Sometimes the speed, tire size and load conditions cause the tire to fold and buckle which results in this saw tooth appearance. I have seen a video posted of a failed tire and while the shot is short I think it had this condition.

  Last weekend, I happened upon an RV that had just suffered a tire failure. I stopped to see if they needed help. After we got the tire changed, I noted the evidence of a RLOF. The tell-tale flex zone running 360° around the tire making it look as if someone had cut the entire circumference at the same location on the sidewall.

The above tire looks pretty bad but under close examination  I quickly found the proof (melted cord) of RLOF.

Just so you Class-A folk don't feel left out here is what a RLOF can look like with steel body

 

So here we have a condition RLOF that is much more descriptive than "Blowout. When we say RLOF then you know the Root Cause was the thing that caused the air to leak out. Could be a puncture, leaking valve, lack of maintenance, impact or other external damage so we could continue our examination to see what caused the air to leak and then we have a chance to take corrective action to prevent a recurrence. What I do not see is a RLOF caused by bad tire design.

Finally almost all the above might have been prevented if the RV had a TPMS as the driver should have been warned well in advance of the tire loosing more than 10 to 15% of its air not the 50% to 70% loss that results in a RLOF.

A Tire Autopsy "Root Cause" Part 1

Many  people make statements about a tire "blowing out" or being defective but few post any facts about the real condition of the tire other than it came apart. There is a major difference between simply reporting a condition and providing information on the "Root Cause".
Examples of Conditions would be "the tread came off' or "tire lost air" or "tire went BOOM".
Examples of Root Cause might be "tire had a puncture" or "tire had an impact break" or "tire was run low and the sidewall had a flex failure". If you don't know the "WHY" of a tire failure then whatever actions were taken after the failure may or may not help to prevent a re-occurrence.

To help you understand this concept I want to take you through some real life examples. In many of these examples it was initially claimed that the subject tire was simply "defective" however as we review these examples I think you will ultimately agree that most tire failures occur because of some outside cause.

Here are three examples of damage done through the use of a high pressure power washer.

In each case someone claimed there was a defect built into the tire that caused a blister to form as seen in the pictures.

I know and proved that the damage was in fact caused by the use of a power washer as I did a quick cut tire examination (autopsy) to examine the layers of the sidewall. No internal contamination was observed.

A theory was formed and an experiment done to confirm or refute the theory. A tire that was sound was selected and using a pressure washer similar to what any of us could buy at a big box hardware store, we were was able to duplicate this damage.

Sidewall Impact Breaks occur under a combination of variables that have a very complex interaction. These include speed, load, inflation, shape and size of the item impacting the tire, angle of impact and even the condition of the shock absorbers. Change one or more of these and you may avoid the damage.

What usually happens is the pot hole or road debris is hit but if the tire doesn't immediately fail the incident is forgotten. Miles later the now damaged and weakened sidewall ruptures with no advance warning. Even if you have a TPMS you will probably get only a few seconds advance warning as the now hot rubber will rupture very quickly and the tire will many times shred which destroys the evidence.

Sometimes the sidewall bulge is observed before the sidewall ruptures. The inspection of tires with this body ply damage allows us to identify the sequense of events. In fact if you attend one of my tire seminars I relate the story of my then fiance and her experience of traveling over 17 miles after the impact before the tire ruptured.

Next time I will cover Belt Detachments

                      and Punctures